5. Connect to power supply
Plug the power cable into the type-C charging port on the bottom of the
main body.
Cleaning Instructions
Disconnect the plug and power cable before cleaning.
Open the lid, empty the hopper, place the appliance upside down, open the
dry battery compartment and turn the dismantling switch to
Lift the base upwards to separate the hopper and the disassembly is
completed. (The hopper and the agitator are washable while the base,
non-washable, should be wiped clean with a damp or dry cloth.)
After cleaning, turn the hopper upside down, tilt the agitator and put it into
the hopper when the outlet aligns to the food chute of the base, then
position the base in place via the corresponding slots at 4 corners.
Turn the dismantling switch to
the lid of the dry battery compartment.
Wipe Clean Only
Washable
-11-
.
to secure the base to the hopper and cover
Washable
Washable
Operation Instructions
Time (24 hours format)
Portion (1-60)
Meal (1-6)
Press
to return to the previous
step
Press and hold
for 3 seconds to
start/cancel the feeding schedule
Timer Setting
Press and hold (
) for 3 seconds to unlock timer setting.
Set timer as following.
Press (
) to confirm and go to next step, press (
Meal Setting
1. Press (
) to set the feeding time of the 1st meal, press (
adjust.
Lock/Unlock
Battery Level
When it reads "E" -
feeding malfunction
Short press
to manually feed
once
) or (
) to adjust.
) or (
) to
-12-