Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and operating instructions
B-55280-05-0-6
BKSremote BTC
5.8
To make or delete a pairing, the service mode must be activated in both de-
vices. Please activate the service mode in the access point first, see chapter
5.8.1–5.8.4. Then, carry out the following steps on the BKSremote BTC.
Press B to start
entering the
admin code
admin code
(default = 000)
5.8.1 Starting Service mode in the radio-controlled
1. Open battery compartment
2. Remove battery
3. Activate monitoring contact for cylinder cam
4. Insert battery while actuating the monitoring contact for locking cam.
The lock is in Service mode for 30 s. The status is indicated by a
continuous beep
5. Close battery compartment
1
T15
EN
32
Pairing and re-pairing
Enter the
Menü 6
electrically coupled lock
2
1 - Pairing
0 - Delete
pairing
4
3
11.2017 | 20411EE | Designed in Germany
Press A to
Press B to
confirm.
leave the
Pairing mode is
menu
active for 30 s.
5
Publicidad
