Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and operating instructions
B-55280-05-0-6
BKSremote BTC
5.8.4 Deleting the pairing in the radio-controlled electrically
coupled cylinder
1. Remove the inside knob cap by means of the special wrench
2. Remove the battery
3. Unplug the motor connection cable
4. Insert the paring connector into the socket (protected against reverse
polarity by ribs at the sides)
5. Reinsert the battery
6. Wait until the beeping gets slower. The cylinder performs a reset and all
paired components will be deleted
7. Remove the pairing connector
8. Plug the motor connection cable back in
9. Fix the inside knob cap by means of the special wrench
1
1
6.
NOTE
EN
34
2
3
Opening the door
Enter the
user code
If you enter the code incorrectly 8 times, you will
be locked out of the system for 30 seconds. The red
LED flashes and the beeper sounds.
Further incorrect entry of the code will result in
being locked out of the system for a further 30 sec-
onds. The red LED flashes and the beeper sounds.
4
5
Press A to
confirm
11.2017 | 20411EE | Designed in Germany
7
Publicidad
