T-Mech 210299 Manual De Instrucciones página 10

USER GUIDE
OPERATING INSTRUCTIONS
STARTING:
1. Press and hold the Safety Button (L).
2. Pull the Starting Lever (K) towards the
handle.
3. Release the Safety Button.
STOPPING:
1. Release the Starting Lever.
ADJUSTING THE BRUSH HEAD HEIGHT
The brush head height can be adjusted using the adjustment lever. There are five levels
which are:
LEVEL
1
2
3
4
5
SAFETY CUT-OUT
This vacuum is protected by a safety mechanism which is activated if the motor is
overloaded, or the brush head is caught and cannot freely rotate. The safety mechanism
To reset the mechanism, release the starting handle and unplug the vacuum. Check the
vacuum for any obstructions and remove if required. Wait a few minutes and you can then
restart the vacuum. Do not press the starting handle while waiting as this will extend the
safety mechanism reset time.
10
K
L
BRUSH HEIGHT
+ 6mm
- 3mm
- 6mm
- 9mm
- 12mm