Maono Maonocaster G1 Neo Manual Del Usuario página 11

1. Connect the accompaniment source (mobile phone), headphones, and microphone to
the sound card as shown in the figure.
2. Use the included USB-C data cable to connect the computer and the Maonocaster G1
Neo. The computer will automatically recognize the device and install the driver.
3. Enter the sound control panel of Windows, and set the "Maonocaster G1 Neo" as the
system default playback and recording device in "playback" and "recording".
Sound
Playback
Recording Sounds Communications
Select a playback device below to modify its settings:
Speakers
Maonocaster G1 Neo
Ready
LG HDR 4K
HD Audio Driver for Display Audio
Ready
Configure
4. Open the streaming or recording software on your computer, and confirm "Maonocast-
er G1 Neo" is set as default audio recording and playback device.
Tips: Connecting your Gaming PC's audio output to AUX port with a 3.5mm cable then
connecting your Streaming PC with USB-C will allow a Dual PC streaming setup.
Set Default Properties
OK Cancel Apply
Sound
Playback Recording
Sounds Communications
Select a recording device below to modify its settings:
Microphone
Microphone
Default Device
Headset Microphone
Maonocaster G1 Neo
Default Device
Configure
- 7 -
Set Default Properties
OK Cancel Apply