Maono Maonocaster G1 Neo Manual Del Usuario página 9

can record their favorite songs, music, beats, and other sound clips into the device
using the microphone, external audio accompaniment, or Bluetooth input for live
broadcasting and recording purposes. Each button can record sound effects for approx.
20s.
Please note that the product does not have preloaded custom sound effects and needs
to be recorded by the user first.
13.1 Erasing existing sound effects:
Press and hold any of the previously recorded custom keys for more than 3 seconds.
During this time, the LED indicator will turn on and flash quickly, indicating that it has
entered the recording erasing state. The light will go out when the erasing is
completed.
13.2 Sound effect recording:
Regardless of whether there are special effects stored in the custom keys or not, the
previously recorded special effects must be erased first. To do this, short press the
corresponding custom key for erasing, and the light will flash slowly, indicating that it
is in the recording state.
The light will go out when the recording is completed. During the recording process,
short press the corresponding custom key to stop the recording.
Note: Each custom key has limited storage space. When the memory of a specific
custom key is full, the device will automatically stop recording. At this point, the light
will automatically go out.
13.4 Playing custom sound:
Short press any of the previously recorded custom keys to start playing the recorded
sound clips. The LED indicator will remain on until the playback is completed.
During playback, you can short press to stop the playback.
14. DC⎓5V Interface
This interface is solely used for powering the device. When using the G1 Neo with a
mobile device such as a cellphone, you can connect an external power supply to
provide power. The G1 Neo will prioritize drawing power from this interface rather than
the 15. USB-C data interface on the right.
15. USB-C Data Interface with bus power
The data interface can be used for audio data communication with computers and
mobile devices. If the 14. DC⎓5V interface is not connected to an external power
supply, the G1Neo will be bus-powered through this interface.
Note:
(1) Android phones need to support the USB host feature and have it enabled.
(2) iPhones with a Lightning connector require a Lightning to USB Camera Adapter
from Apple in order to connect to the G1 Neo.
16. 3.5mm Line Out
It can be used to connect to a powered speaker or a streaming PC in a dual-PC
streaming setup.
- 5 -