To check the MAC address
Peak Demand Off (Override mode)
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal from
the utility company, you can activate Peak Demand Off (Override mode).
When you activate Peak Demand Off (Override mode), the refrigerator ignores the SMART
GRID (Demand Response) signal and is not controlled by the utility company.
Activating and deactivating Peak Demand Off (Override mode)
1. Press and hold Freezer for 3 seconds.
2. A buzzer sounds and 'Or' and 'on' is displayed in the freezer and fridge temperature
displays for 5 seconds. Then the Peak Demand Off (Override mode) icon (
3. If the refrigerator receives a SMART GRID (Demand Response) signal from the utility
company, 'Or' is displayed in the freezer temperature display.
4. To deactivate Peak Demand Off (Override mode), press and hold Freezer for 3 seconds.
5. A buzzer sounds and 'Or' and 'oF' is displayed in the freezer and fridge temperature
displays for 5 seconds. Then the Peak Demand Off (Override mode) icon (
NOTE
• Alternatively, you can activate or deactivate Peak Demand Off (Override mode) using
the SmartThings app and the Energy Management function. See the next page.
Untitled-3 49
1. In this mode, the MAC address appears
on the temperature panel (on both the
freezer and the fridge sections of the
panel) sequentially for 1 minute.
Press and hold both Freezer and Fridge
for 6 seconds. The temperature panel
blinks. Then, press Freezer again to
display the MAC address. The fridge
beeps.
2. For example, if the MAC address is "11-
22-33-44-55-66", the temperature panel
displays the address for 1 minute in this
sequence: "-- / --" "11 / 22" "33 /
44" "55 / 66" "-- / --".
After the 1 minute, the MAC address
disappears and the temperature panel
returns to the normal state.
NOTE
The temperature panel displays "-- / --"
for an unknown MAC address or if a Wi-Fi
connection is not established or is lost.
) turns on.
) turns off.
English
49
2021-06-07
3:25:00