Descargar Imprimir esta página

Qilive Q.1818 Manual De Instrucciones página 8

Boombox portátil con reproductor de cd/usb

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Press the M.+ or M.- button to listen to the stored stations directly
EN
Notes:
Up to 30 stations can be preset and presets are stored in frequency
order.
Depending on your location, a preset may be stored with no station,
and you'll hear only noise when you select it.
Manual presets
You may store up to 30 (FM) radio stations in memory at your preference,
so you can listen to your desired station quickly with no need for tuning.
1.
Press the
MEM./P-MODE button, "PROGRAM" will show steadily and program
number (e.g., "P01") will flash on the display.
2.
Use the M.+ or M.- button to choose the desired program sequence
(P01-P30), then press MEM./P-MODE to confirm.
3.
Tune to another station, then repeat steps 1 & 2 until all desired
stations are stored.
4.
Press M.+ or M.- to listen to the stored stations directly.
4.6. CD/MP3 OPERATION
Discs for playback
This system only can play digital audio CD/CD-R/CD-RW discs.
Loading a disc
1.
Press the
2.
Press the PUSH TO OPEN area to open the CD door, "OP" will be
shown on the display.
3.
Place a CD into the tray with the printed side facing up.
4.
Close the CD door.
The display will show a flashing "- - -", then the total number of tracks
will be shown. Playback begins automatically from the first track.
5.
To remove the CD, press STOP button to stop the playback, then
press PUSH TO OPEN area to open CD door, the display will show
"OP". Hold the CD by its edges, and carefully take it out.
Notes:
Make sure the disc is stopped before opening the CD door.
To ensure good system performance, wait until the unit has finished
reading the disc before proceeding.
If no disc is loaded into the tray, or the disc is damaged or
unreadable, the display will show "NO".
Playing a disc
1.
The unit will start playback from track 1 after reading finished. The
indicator and the current track will be shown on the display.
■ To pause the playback, press the PLAY/PAUSE button. The
indicator will flash and current track no. will show on the display.
/
button to select the desired station. Then press
/FUNC button on until to select "CD" mode.
8

Publicidad

loading