Publicidad
5.
Guide the camera's cable through
the surface opening or cable notch.
6.
Connect one end of the BNC cable
to the camera's video output and
the other end to the DVR's video
input. Then, plug the camera's power
adapter into its port and connect
it to a power outlet to turn on the
camera.
7.
Align the camera and its cover flush
with the mounting bracket. Adjust
the camera's angle as needed.
Then, use the T10 Torx Key to securely
tighten the adjustment screw and
keep it in place.
8. Important! Remove the vinyl film
from the camera lens for a clear
view.
15
Publicidad
