Velleman MML30G Manual Del Usuario página 10

• Under "Printer Name", type in the desired name (min. 12 characters long) for the Display Printer Driver. Select
"No" to select the printer as the default printer and click "Next".
• Click on "Finish" to complete the setup. Insert the CD or disk in the proper driver if necessary and click "OK".
• Select the printer you've created. Go to "File" and click on "Properties".
• Click on the "Details" tab and click on "Port Settings".
• Make sure the settings below are set accordingly. Click on "OK" when done.
Baud Rate
Settings
should be as
shown
• Click on the "Sharing" tab and click on "Shared As". In the "Share Name" box, type in the "Printer Name" used
earlier. Type in a password when desired.
• The RSC Printer Driver setup is now complete.
TMC Printer Driver Setup
• Click "Start", "Settings" and "Printer". The "PRINT" dialog window will appear.
• Double click on the "Add Printer" icon. The "Add Printer Wizard" window will appear.
• Click on "Next". Select "Network Printer" and click "Next".
• Select "No" to print from "MS DOS based programs". Click on "Browse".
• Double click on the name of the RSC on the network and select the created Display Printer Driver.
• Click on "OK". Now click on "Next".
• Under "Printer Name", type in the "Printer Name" used earlier.
• Select "No" to select the printer as the default printer and click on "Next".
• Click on "Finish" to complete the setup. Insert the CD or disk in the proper driver if necessary and click "OK".
• The TMC Printer Driver Setup is now complete.
Sending a Message through the LAN
• Start the software and create your message.
• Click on
for "Send via Network". Enter the "Sign ID Number" and "Page Number" and click "OK".
• Select the Display Printer Driver from the "Printer Name" box and click "OK".
MML30G - 10 - VELLEMAN