Ventur COR-F Manual De Instalación página 11

The connection can be made either through the back or through the side of the unit. In the case of
connection through the side, cable must be fed through the terminal cover before connecting to the
terminal.
Fix the cable with the clamp provided and mount the front cover.
OPERATION
When operating the ON/OFF switch, the pilot lamp light indicates that the unit is operational. On the
front cover there are three switches that have functions as indicated below :
A P P L I A N -
COR-F / COR-2F
HEATING
COR-3.5
SWITCH
HEATING
COR-7.5
SWITCH
COR-10
HEATING
SWITCH 2
Power settings on COR-10:
- First heating switch ON, second OFF = 5000 W
- First heating switch ON, second ON = 10000 W
NOTE: The heating switches have a pilot lamp which illuminates when in the ON position.
PROTECTION AGAINST OVERHEATING
automatically disconnect the unit in case of overheating.
MAINTENANCE
The COR Air Curtains do not need any special maintenance, but it is recommended to keep the inlet
vacuum cleaner. Disconnect the unit from the mains supply before carrying this operation.
ACCESSORIES
In case of restricted access to switches on the unit, there are a range of remote controls available to
SWITCHES
LOW SPEED
HIGH SPEED
LOW SPEED
HIGH SPEED
HEATING
SWITCH 1
9
ON
OFF
ON
OFF
ON
OFF
ON
OFF