Ventur COR-F Manual De Instalación página 12

operate all functions of each model:
Depending on individual requirements, it is also possible to connect an external thermostat, as shown
on the relevant wiring diagrams.
WIRING DIAGRAMS
COR-F
COR-3,5
To connect an external thermostat:
1. To control the fan and heating elements simultaneously remove the link between terminals 4 and 5
on the terminal strip B and connect the thermostat across these terminals.
If the Air Curtain is being installed in a bathroom it must be situated out of reach so that the controls
cannot be operated from within the bath or shower.
COR-7,5
To connect an external thermostat:
1. To control the fan and heating elements simultaneously remove the link between terminals 3 and 4
on the terminal strip B and connect the thermostat across these terminals.
If the Air Curtain is being installed in a bathroom it must be situated out of reach so that the controls
cannot be operated from within the bath or shower.
COR-10
To connect an external thermostat:
1. To control the fan and heating elements simultaneously remove the link between terminals 4 and 5
on the terminal strip B and connect the thermostat across these terminals.
If the Air Curtain is being installed in a bathroom it must be situated out of reach so that the controls
COR-2F
AFTER SALES SERVICE
In case of any problem with the unit, it is advised to contact your S&P dealer. Any manipulation of the
appliance by personnel not appointed by S&P will cancel the guarantee.
CORF-F / COR-2F : CR-F
COR-3,5 : CR-3,5
COR-7,5 : CR-7,5
COR-10 : CR-10
10