When you turn a philips screwdriver (+)
counterclockwise (
move up.
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a filter is one of the helpful
features on your new refrigerator.
To help promote better health, the water filter
removes unwanted particles from your water.
However, it does not sterilize the water or destroy
microorganisms. You may need to purchase a
water purifying system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
required.
If the refrigerator is installed in an area with low
booster pump to compensate for the low pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly filled.
To do this, press the water dispenser lever until the
water runs from the water outlet.
DA68-02601D-00.indb 15
), the door will
UP
Connecting to the water supply line
1. First, shut off the main water
2. Locate the nearest cold water drinking line and
3. Connect the water line installation kit to the
English - 15
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼" compression nut.
supply.
install the pipe clamp and shut off valve.
Cold water line
Pipe clamp
Shut off valve
shut off valve.
Cold water line
Water line installation kit
Pipe clamp
Shut off valve
14. 11. 24.
11:08