ELECTRONIC BATHROOM SCALE
Dear Customer;
Thank you for purchasing this product. Please
read these instructions carefully to take full
advantage of your product.
READ BEFORE USE
• Do not disassemble the scale as incorrect
handling may cause injury�
• This product is not intended for professional
or medical use; it is intended for private use
only�
• Clean with a lightly dampened cloth without
allowing any water to get into the device� Do
not use solvents or immerse the product in
water�
• Avoid excessive impact or vibration to the
unit, such as dropping the product onto the
floor�
• Important: if the appliance is moved
before weighing, reinitialize the scale (See
«Initialisation'').
• The scale turns off after approximately
twenty seconds of inactivity�
PRODUCT USAGE
Initialisation
• Choose the unit of measurement before
stepping on the scale, it cannot be changed
during weighing�
Measurement unit
• The default unit is KG� To select the desired
unit (kg/lb/st), press the "UNIT" button on
the back of the scale�
EN
Operation
Step onto the scale to switch it on� It displays
0�0 and then the weight measured�
The measured weight flashes three times,
then remains on the display for approx� 20
seconds�
A "C" may be displayed after a weighing
operation; this indicates a reset of the scale's
load cells (zeroing)� In this case, a new
weighing session is required�
Warning indicators
Overload: maximum weight exceeded
(>180Kg), remove weight immediately
PROTECT THE ENVIRONMENT
After life, dispose of this product at a
designated waste recycling point�
GUARANTEE
This product is guaranteed against defects
in materials or manufacturing� During the
guarantee period, any such defects will be
repaired free of charge (proof of purchase
must be shown in the case of a complaint
under guarantee)� The guarantee does not
cover damage resulting from improper use
or negligence� In the event of a claim, first
contact the shop where you purchased the
product�
Autostop 20'
5