Publicidad
Idiomas disponibles
Idiomas disponibles
English
- Always recharge the battery after using the machine.
Do not store the battery discharged or half charged.
- Always recharge the battery inside your home and
garage to preserve the battery and charger from
humidity and inclement weather.
- Recharge the battery at temperatures between 5º
and 40º C.
- Always keep the battery away from water, humid
areas, heat sources and chemical products.
6.5. INSTALL THE BATTERY
2
1
To remove the battery, press the unlock button (1) and
pull the battery (2) back.
7. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a complete
maintenance take the machine to your nearest service
agent.
It is always necessary to stop the engine, remove
the battery and verify that the cutting tool is stopped
before cleaning or transporting the machine.
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Install the battery by
sliding it along the rails
until "clack" sounds. This
ensures that it will remain
securely connected to the
machine.
36/124
Unplug the battery before performing any operation
on the machine. Read the instruction manual before
performing any operation on the machine.
WARNING! Do not change the machine or its cutting
elements. An incorrect change to these elements
could cause SEVERE PERSONAL DAMAGES OR
DEATH.
Only use original spare parts and accessories for this
machine so as to obtain the best performance from
the machine.
These spare parts and accessories can be found
in the official distributors of the brand. The use of
other spare parts and accessories could result in risks
to the end user, people who are nearby and to the
machine.
7.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
7.1.1. GENERAL CHECKS
Check the condition of the blades for signs of wear.
7.1.2. CLEANING
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result
in damages to the machine and the machine will
work less. Wherever possible, clean the machine
immediately after working with it.
Maintain your machine clean and in good conditions.
Do not clean the engine with water. The electric
engine could stop functioning.
Publicidad
