Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
CAREFULLY READ AND UNDERSTAND
THE SAFETY CHAPTER AND OPERATION
INSTRUCTIONS BEFORE YOU OPERATE THE
PRODUCT.
4.1
BEFORE YOU USE THE PRODUCT
4.1.1
CONNECT THE BATTERY CHARGER
1.
Connect the battery charger to the proper voltage
and frequency that is specified on the rating plate.
2.
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.2
CHARGE THE BATTERY
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.3
BATTERY INFORMATION
Refer to the Battery Operator Manual for information
about how to use the battery.
4.1.4
CONNECT THE BATTERY TO THE
PRODUCT
WARNING
ONLY USE GREENWORKS ORIGINAL
BATTERIES WITH THE PRODUCT.
1.
Make sure that the battery is fully charged.
2.
Push the battery into the battery compartment.
The battery locks into position when you hear a
click.
CAUTION
IF THE BATTERY DOES NOT MOVE EASILY INTO
THE BATTERY COMPARTMENT, THE BATTERY
IS NOT INSTALLED CORRECTLY. THIS CAN
CAUSE DAMAGE TO THE PRODUCT.
3.
Make sure that the battery is installed correctly.
English
4.2
START THE PRODUCT
1.
Pull the trigger to start the product.
2.
The variable speed trigger delivers higher air
speed with increased trigger pressure and lower
air speed with decreased trigger pressure.
4.3
ACTIVATE TURBO BOOST (TEMPORARY
INCREASED AIRFLOW)
1.
Pull the trigger to start the product.
2.
Push the turbo boost button to engage the
maximum airflow.
3.
Release the turbo boost button to operate the
product with the default airflow setting.
Note: Using the turbo boost button will result in
faster battery consumption. Exercise caution and only
activate the turbo boost when necessary.
4.4
ACTIVATE CRUISE CONTROL
(SUSTAINED AIRFLOW)
1.
Pull the trigger to start the product and select the
optimal airflow for your work.
7
EN
Publicidad
