Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS
― ―
1.
Handle
2.
Temperature control dial
3.
Power light
4.
Power selection dial
5.
Safety grill
6.
Tip-over switch
CONTROL PANEL
― ―
1.
Fan Only mode
2.
Low Power
3.
High Power
4.
Low Swing
5.
High Swing
6.
OFF
7.
Temperature Control Dial
8.
Power Selection Dial
9.
Power Light
8 of 64 | English
1
2
4
3
5
6
2
6
1
3
4
5
7
9
8
OPERATING INSTRUCTIONS
― ―
Switching Your Heater On and Setting the Temperature
1.
Insert the plug into the power socket.
2.
Turn the power dial to the desired setting:
•
FAN ONLY MODE
•
LOW POWER – Low heat (1000W)
•
HIGH POWER – High heat (1800W)
•
LOW SWING – Low heat oscillation (1000W)
•
HIGH SWING – High heat oscillation (1800W)
3.
Turn the temperature control dial until you hear a click – this will turn the unit on. Continue
turning the dial to your desired temperature. The temperature control dial acts as a
thermostat. Once the room has reached the desired temperature the unit will switch off.
Switching Off
1.
Turn the power dial to the OFF position.
2.
Turn the temperature control dial anticlockwise to the lowest setting.
3.
Remove the power plug and store the heater after the unit has cooled down.
Your Heater's Safety Guards
•
Your heater will automatically turn off when it is not upright, due to the tip-over switch on
the bottom of the appliance. This is to prevent damage to your home and your heater will
turn back on when it is in its normal upright position.
•
Your heater will automatically turn off when the appliance has overheated. This may be
because there is something covering the heater. Unplug the appliance and wait 30 minutes
for it to cool. If there is no damage to the unit, cord, or plug, plug the unit back in and use as
normal.
English | 9 of 64
Publicidad
