Publicidad
Idiomas disponibles
Idiomas disponibles
Class 2 SRLs: Anchor above, or below, Dorsal D-Ring.
- Working Length: 30 ft. (9.1 m)
- Capacity: ANSI 130-310 lbs. (58.96-140.61 kg), OSHA Up to 420 lbs.
(190.51 kg)
023-5325
- Average Arrest Force: 1,350 lbs. (612.35 kg)
Leading
- Maximum Arrest Force: 1,800 lbs. (816.47 kg)
Edge
- Actual Arrest Distance: ≤ 105 in. (266.7 cm)
30' Cable
- Maximum Free Fall Distance: 72 in. (182.9 cm)
- Minimum Required Fall Clearance: 17 ft. 4 in. (5.2 m)
- Working Length: 50 ft. (15.24 m)
- Capacity: ANSI 130-310 lbs. (58.96-140.61 kg), OSHA Up to 420 lbs.
(190.51 kg)
023-5326
- Average Arrest Force: 1,350 lbs. (612.35 kg)
Leading
- Maximum Arrest Force: 1,800 lbs. (816.47 kg)
Edge
- Actual Arrest Distance: ≤ 108 in. (274.32 cm)
50' Cable
- Maximum Free Fall Distance: 72 in. (182.9 cm)
- Minimum Required Fall Clearance: 17 ft. 6 in. (5.33 m)
Energy Absorber
►
►
8.0 FALL CLEARANCE
Always select a personal fall arrest system and anchor point location that limits free fall
and swing fall as much as possible. A free fall of more than 6 ft. could cause excessive
arrest forces that could result in serious injury or death.
• Free Fall: The distance a user falls before the fall arrester activates. The user must
determine the amount of Free Fall present in the system as this can increase or
reduce the Fall Clearance. Determine height of anchorage from the D-ring, lateral
offset from anchorage, anchorage setback from working edge, and the SRL model
number being used to select the appropriate clearance chart.
• Actual Arrest Distance (AD): Safewaze SRLs are tested in accordance with
ANSI Z359.14-2021 conditioning test protocols. Table 2 reflects the Actual Arrest
Distances of the Lodestar when subjected to Ambient, Wet, Hot, and Cold testing.
These Actual Arrest Distances are typically lower than the 42" maximum as specified
per ANSI. In certain instances this may allow for a Qualified Person to adjust
Minimum Required Fall Clearances.
• Harness Stretch: The distance the harness stretches after forces have been
absorbed by the harness.
• Worker Height: The distance between the working surface to the dorsal D-ring.
TABLE 1: MATERIALS
Housing
Cable
Hardware
V3. 2023 Copyright Safewaze: 220-00109
Nylon and Glass Fiber
3/16 in. Galvanized Steel
Steel and Stainless Steel
Polyester
10
Publicidad
