Murray FLURRY MYS2120801 Manual Del Usuario página 5

2. Assembly
NOTICE: This snow blower is shipped without gas
or oil in the engine.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
WARNING: To prevent accidental starting that could
cause serious personal injury, always disconnect the engine
spark plug boot from the spark plug when assembling parts.
WARNING: Only use the attachments recommended
by the manufacturer. The use of attachments or accessories
without approval can result in serious personal injury.
Unpacking
Some parts of your new snow blower have not been
completely installed for shipping purposes. To ensure safe
and proper operation, all parts and hardware must be
assembled as instructed below using appropriate tools to
ensure proper tightness.
Carefully remove the product and any accessories from the
package. Make sure that all items listed in the Packing List
are included.
Packing List
Content Qty
Snow blower base 1
Discharge chute handle 1
Snow discharge chute 1
Screw 6
Operator's manual 2
Wrench 1
Bottle of engine oil 1
Quick start guide 1
8
NOTICE: Inspect the product carefully to make sure
no damage occurred during shipping. If any parts are
damaged or missing, please call 855-693-2582 for assistance.
1. Set the box on a solid, flat surface.
2. Cut down two end corners of the box and lay the end
panel down flat.
3. Remove everything from the box except the snow blower
base – remove the chute, hardware, etc. Make sure all
the assembly parts are included before starting assembly.
4. Pull the snow blower out of the box. (Fig.1)
5. Now you are ready for assembly.
Fig.1
FLURRY SNOW BLOWER
Set up Your Snow Blower
Assemble the Upper Handle
1. Pivot the upper handle from the stored position to the
working position. (Fig.2A)
2. Tighten the knobs on both sides of the handle. (Fig.2B)
3. Gently press the auger control handle down slightly and
insert the control cable hook into the hole on the
control handle. (Fig.2C)
4
Engine oil dipstick
Fig.2A
FLURRY SNOW BLOWER
1
Fig.2B
Fig.2C
9