enphase Mobile EV Charger Manual De Usuario página 11

Mobile EV Charger EVSE User Manual
Amber
#
POWER
1
2
3
4
5
6
7
8
9
10
February 2024
140-00265-04
Red
FAULT
Off
Off
Off
On
Off
On
ON -
On
not blinking
ON -
Off
not blinking
1 - blink
Off
2 - blinks
Off
3 - blinks
Off
4 - blinks
Off
5 - blinks
Off
Table 1: Front panel LED information
© 2024 Enphase Energy Inc. All rights reserved.
Green
Fault condition
CHARGING
No power to the EVSE. Check circuit
Off
breaker.
EVSE has power, not plugged into
Off PEV, or
PEV not requesting a charge.
Charging enabled, power is supplied
On
to the vehicle.
Ground monitor trip, improper
Off grounding or ground is not present.
Call an electrician.
PEV Pilot communication out of
spec,
Off
disconnect from vehicle and recon-
nect.
PEV ground fault trip. Check vehicle
Off
connection, disconnect and restart.
Internal EVSE Fault. Disconnect from
Off vehicle, turn power off and then back
on. If fault persists, call for service.
Internal EVSE Fault. Disconnect from
Off vehicle, turn power off and then back
on. If fault persists, call for service.
Internal EVSE Fault. Disconnect from
Off vehicle, turn power off and then back
on. If fault persists, call for service.
Internal EVSE Fault. Disconnect from
Off vehicle, turn power off and then back
on. If fault persists, call for service.
11