Publicidad
Idiomas disponibles
Idiomas disponibles
E
Getting Started
Charging
To charge, connect one end of the included micro-USB cable to a power adapter or a USB
charging port and the other end to the micro-USB port on the camera. When you connect the
camera to the power, the camera will automatically turn on. To more effectively charge the
camera, turn it off. The red charging indicator will stay on when the camera is charging and
turn off when the camera is fully charged. Charging with the power adapter takes around 2
hours.
Turning the Camera On/Off
Press and hold the power button for 2 seconds to turn the camera on/off. When the camera is
turned on, the two LED status indicators will light up and the display will turn on.
Using a Micro SD Card
The camera does not include internal storage and requires a micro SD card (Class10 + recom-
mended and 32GB Max supported) to function. Use a high-quality, branded card for maximum
reliability. Insert a micro SD card into the micro SD card slot and format it [ 'Format' in camera
system settings) to prepare the card for use. Formatting will permanently erase any data on the
micro SD card.
Camera Modes
Press the mode button to cycle through video, dashcam, photo, and playback modes. Press
down button to go to setting mode.
Video Mode: Press the OK button to start or end recording. When the camera is record-
ing, the LED status indicators flash once every 2 seconds. When it stops recording, the
LED status indicators stay on.
Photo Mode: Press OK button once to take photos.
> D 1
O
O
Dashcam Mode: Press OK button to start or end recording.
Playback Mode: Press down button to switch between CAR, video or JPG files and then
press OK button to confirm. Press up / down button to choose desired picture or video.
For videos, press OK button to play / pause, mode button to stop, and up / down to
rewind / fast-forward. Press mode
button to exit playback mode.
u
Publicidad
