Publicidad
Shower Installation
Install canopy onto shower arm. Wrap
threads with supplied thread tape. To
prevent marring the surface, use a strap
wrench or use the end of the arm for
leverage.
Install shower head with wrench. Hand
tighten only
Spout Installation
Note:
The Lloyd spout can only be installed via slip-
on.
Place pipe tape onto thread. Install the slip-
on adapter on to the elbow. Remove the
existing nipple if necessary.
Slide the spout into position and secure with
set screw.
Remove the slip-on adapter. Apply pipe
tape onto the nipple threads and screw the
spout into a secure position.
8
Publicidad
