Overview; Features - Sony YS-SX509P Manual De Instrucciones

Overview

Features

The Sony YS-SX509P/409CE Multiplexer is designed for use with multiple
camera surveillance and monitoring systems. The unit has 9 video inputs,
allowing up to 9 video channels to be displayed on a single monitor. In
addition, a full screen image can be displayed for each input signal.
A built-in character generator enables you to superimpose letters and
numerals onto each picture. Upon receiving an alarm signal, the unit can
be programmed to switch the display to the relevant location.
This unit can display live camera images in full screen mode or in a split
screen (4 or 9 divisions). Recorded pictures can also be displayed in a split
screen.
• The field switcher function can, during recording, display the images full
screen or full screen sequentially.
• The multi-viewer function can, during live images mode, display the
images in a split screen and record the images as displayed.
• High-speed switching (up to single field switching)
• The following operations are possible at each camera according to the
timer settings:
• Different alarm durations of certain or all cameras can be set according to
the day or night periods.
• Live or recorded pictures of certain or all cameras can be masked so they
are not visible according to the day or night periods.
• Automatic switching delay can be set for each camera according to the
day or night periods.
• Video sensor points areas can be set for each camera. Trigger can start
alarm recording operations in priority.
• If the video signal is interrupted at any of the cameras, the frozen image
just previous to the interruption or test chart can be displayed (selectable
for each camera).
• The unit can be controlled by computer through the RS-232C connection.
• A system controller (not supplied) can be used through the RS-485 (RJ-
11) connection.
• Up to 100 alarm entries can be displayed on-screen.
5
(GB)