Hama FLORES Instrucciones De Uso página 2

G Operating Instructions
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• "Flores" radio alarm clock
• 1 AA battery
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating
and use it in
only in dry environments.
• Do not use the product in areas in which electronic
products are not permitted.
• Do not place the product near interference elds, metal
frames, computers, TVs, etc. Electronic devices and window
frames can negatively affect the product's functionality.
• Do not drop the product and do not expose it to any
major shocks.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to quali ed experts.
• Do not modify the product in any way. Doing so voids the
warranty.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately in accordance
with the locally applicable regulations.
Warning - Batteries
• When inserting batteries, note the correct polarity (+
and - markings) and insert the batteries accordingly.
Failure to do so could result in the batteries leaking or
exploding.
• Only use batteries that match the speci ed type. Keep
the instructions for the correct choice of batteries
included with the operating instructions of devices safe
for future reference.
2
Warning - Batteries
• Before you insert the batteries, clean the battery contacts
and the polarity contacts.
• Do not allow children to change batteries without
supervision.
• Replace all the batteries in a set at the same time.
• Do not mix old and new batteries, or batteries of
different types or from different manufacturers.
• Remove the batteries from products that are not being
used for an extended period (unless these are being kept
ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not burn batteries or heat them up.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can
contain toxic, environmentally harmful
heavy metals.
• Remove spent batteries from the product
and dispose of them without delay.
4. Setup
4.1 Inserting the battery
• Open the battery compartment on the back of the alarm
clock.
• Insert an AA battery, observing the correct polarity.
• Close the battery compartment again.
5. Operation
5.1 Automatic setting of the time according to the
DCF signal
• After the battery is inserted, the alarm clock automatically
starts to search for a DCF signal.
• After around 5-10 minutes (depending on how quickly the
radio signal is received), the hands on the clock will adjust to
the correct time.
5.2 Manual time setting
• If the correct time has not been set automatically after
around 10 minutes, no DCF signal has been received.
• Press and hold the SET button to set the correct time
manually. Once the required time is reached, release the
SET button.
• The clock automatically continues to search for the DCF
signal every day. Once the signal is received successfully,
the manually set time and date are overridden.
• Change the location if necessary and avoid areas with
sources of interference (cordless and mobile phones, radio
loudspeakers, WLAN, etc.).