Descargar Imprimir esta página

ARIETE 4160 Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
trOubleshOOting
Warning!
Immediately switch off the appliance in case of operational faults and electrical failures. Unplug it from the socket-
outlet. Wait for the appliance to cool down.
Problems
On light off
No steam comes out of
the nozzle
Unexpected increase
of the noise level of the
pump
Water leakage from the
nozzle
Causes
Not plugged in
Steam dispensing button not
pressed
The appliance is not ready for
use
Water shortage in tank.
Incorrect insertion of the tank in
its seat.
The steam exit holes may be
blocked by limescale.
Water shortage in tank.
Incorrect insertion of the tank in
its seat.
Possible condensation residue
in the steam duct
Solutions
Check that the appliance is properly plugged in. Check
that there is current on the power supply line. Try to plug
the appliance into another socket-outlet. If the problem
continues, contact an Authorised Service Centre.
Press the steam dispensing button all the way down
Press the steam dispensing button for thirty (30) seconds
or until you hear the noise of the pump. Wait for the steam
to come out.
Fill the tank up to the level marked MAX.
Remove the tank and put it back in, making sure it is in
the right position.
Contact an Authorised Service Centre.
Turn off the appliance and fill the water tank.
Remove the tank and put it back in, making sure it is in
the right position.
Press the steam dispensing button until you see steam
coming out. Position a soft cloth so as to not dampen
the floor. If water continues to come out, turn off the
appliance. Wait at least 5 minutes so that the steam head
and cloth cool down. Try again.
13

Publicidad

loading