Descargar Imprimir esta página

Buffalo FC374 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
UK
Troubleshooting
Fault
Appliance not working The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Appliance does not
Faulty thermostat
reach set temperature
Faulty element
Build-up of fat on the element
Appliance heats up
Indicator light has expired
but indicator light
does not come on
Power indicator
Faulty element
light comes on but
appliance does not
Faulty thermostat
heat up
Thermostat set incorrectly
Appliance slow to
Faulty element
heat up
Build-up of fat on the element
No power
Thermal cut-out activated
Oil overheats or starts
Thermostat damaged
to smoke
Technical Specifications
Model
Voltage
FC374
230V, 50Hz
FC375
230V, 50Hz
FC376
230V, 50Hz
FC377
230V, 50Hz
Electrical Wiring - FC374/
FC375
This appliance is supplied with a 3 pin BS1363 plug
and lead.
The plug is to be connected to a suitable mains
socket.
This appliance is wired as follows:
Live wire (coloured brown) to terminal marked L
6
FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 6
FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 6
Probable Cause
Capacity
Power
(litres)
2900W
8L
2 x 2900W
2 x 8L
6000W
8L
2 x 6000W
2 x 8L
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of
any obstructions. In the event of any emergency
disconnection being required they must be readily
accessible.
Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Clean the appliance
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Call BUFFALO agent or qualified technician
Clean the appliance
Please check your machine is safe with no
obvious damage and then press the re-set
switch
Switch Off immediately. Call BUFFALO agent
or qualified technician
Max batch
Dimensions
load (kg)
H x W x D mm
1
450 x 280 x 510
2 x 1
450 x 560 x 510
1
450 x 280 x 510
2 x 1
450 x 560 x 510
Neutral wire (coloured blue) to terminal
marked N
Earth wire (coloured green/yellow) to terminal
marked E
Weight
11.1kg
19.6kg
12.2kg
22.3kg
2021/10/26 11:36
2021/10/26 11:36

Publicidad

loading

Este manual también es adecuado para:

Fc375Fc376Fc377