Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Working without the automatic leveller
NOTES:
The leveller light
without the automatic leveller. The laser lines depicted are not
levelled.
The product has 2 magnets
product to surfaces that attract magnetic objects, e.g. steel shelves.
m
ATTENTION! The magnetic surface used should be flat and not
curved or uneven surface. Otherwise, the product will fall down and
will be damaged.
1. Push the levelling slide switch
2. Switch on the product.
˜ Working with the tripod
(Fig. B)
Screwing the laser onto the tripod mount
Screw the internal thread
screw
.
[
]
Removing/inserting the tripod mount
1. Open the lever
2. Remove the tripod mount
3. Place the tripod mount
4. Lock the tripod mount
ATTENTION! Do not use excessive force. This may damage the
m
product.
26 GB/IE
will illuminate permanently in red when working
[
]
. The magnets allow you to attach the
2 ]
[
[
of the product hand tight onto the tripod
[
]
.
6 ]
[
in an upward direction.
[
]
on the tripod for insertion.
[
]
by closing the lever
[
]
to the right (closed lock).
]
[
.
6 ]
[
]
Publicidad
