Parkside Performance PKLLP 360 B3 Instrucciones De Utilización Y De Seguridad página 27

˜ Adjusting the tripod
(Fig. C)
NOTE: You can use the dragonfly
alignment of the tripod.
1. Pull the tripod legs
2. Lock the tripod legs
Setting the height, tripod feet
1. Open the snap fasteners
2. Extend the tripod legs
3. Close the snap fasteners
Setting the height, crank handle
1. Fold up the crank handle
2. Hold the crank handle
3. Unscrew the locking ring
4. Crank the tripod to the desired height.
5. Turn the locking ring
Adjusting the inclination, forward/back
1. Turn the handwheel bolt
2. Set the desired inclination.
3. Turn the handwheel bolt
place.
Adjusting the inclination, sideways
1. Turn the butterfly screw
2. Fold the tripod to the desired inclination.
3. Turn the butterfly screw
Rotating the tripod
1. Turn the adjusting screw
2. Hold the handwheel bolt
direction.
3. Turn the adjusting screw
[
apart.
[ 7 ]
into position with the locking ring
[ 7 ]
.
[ 8 ]
to the desired length.
7 ] [
.
[ 8 ]
.
[ ]
firmly with one hand.
[ ]
by turning it to the left.
[ ]
to the right to lock this position.
[ ]
to the left to loosen.
[ 5 ]
to the right to lock the inclination into
[ 5 ]
to the left to loosen.
4 ] [
to the right to lock into place.
[ 4 ]
to the left to loosen.
[ ]
and turn the tripod in the desired
5 ] [
to the right to lock into place.
[ ]
to check the horizontal
]
.
9 ] [
GB/IE 27