Publicidad
Idiomas disponibles
Idiomas disponibles
Sauna/SANARIUM
7.
System settings
Call up the service menu
'
See page 21.
)* With SANARIUM controller 18033/18040 with function.
)* With Sauna controller 18029/18040 without function (changes to these values are
not applied).
7.7.
Service menu 06 - OFEU, humidity offset )*
Input:
3
Input range -10 g/m
to +10 g/m
7.8.
Service menu 07 - OTEM, temperature offset
Input:
Input range -5 °C to +5 °C to the nearest degree.
Setting the temperature offset in the plus range may damage the STL in the long term.
7.9.
Service menu 08 - LT, power pack recognition
At a capacity of > 9 kW and special voltage.
Input:
0
=
inactive
2
=
active 75 °C)*
(assumes a separate power pack)
7.10. Service menu 09 - DRY, interrupted final drying phases)*
Display:
Number of final drying phases interrupted by the operator after a SANARIUM session.
7.11. Service menu 10 - ERRO, display error
Display:
The last five errors can be called up by pressing the +/- symbols.
Storage locations E1 to E5 show the error history.
The value shows the stored error number for the selected storage location.
50701290/12.14
3
to the nearest 1 g.
1
=
active
(assumes a separate power pack)
PAGE 23
Publicidad
