Quick Tools QU870D Instrucciones De Uso página 18

 Do not use the device near flammable substances and components.
Use a heat-resistant work surface and keep your workplace clean.
 Solders, fluxes and heated materials can develop harmful properties
and should be vacuumed in a controlled manner. Do not breathe these
toxic fumes or gases and provide adequate ventilation.
 Wear protective clothing (protective gloves, safety goggles, etc.) and
avoid contact of the soldering iron with skin and hair or other
flammable materials.
Food is prohibited in this work environment.
 The use for the operation may only take place in a dry indoor area,
protect the device from liquids and moisture, also by possibly damp
hands. Otherwise, short circuits and electrical shocks could be
triggered.
 Inform others in the work area that the temperature may be very high
during operation. Switch off the device as soon as the work is finished
to avoid danger.
 Do not leave the device unattended while it is in operation.
After switching off, wait until the heated parts have reached room
temperature when you touch parts or want to change parts.
Care about electronic shock
 Make sure that the power supply is well grounded, and avoid danger of
creepage.
 Make sure that the power line is not covered with anything, avoid
breakage of line and getting an electric shock.
 Make sure the heater not impact with each other and avoid leaking of
liquid (such as water, alcohol).
 When checking or repairing, please turn off the power and remove the
power plug of the unit.
Measures for a safe working environment:
 The use of the device by children from 8 years and persons with
disabilities is possible if they are supervised and instructed for safe use.
CAUTION
2
USER MANUAL