Quick Tools QU870D Instrucciones De Uso página 21

Symbol Explanation
channel
CH1-CH3
ext. Temperature sensor connected
sound on
red: temperature rises
blinks red-black: Set temp. is reached
blue: temperature decreases
T1 / T2 temperature zone
M2 hot plate controls external device
M1 communication function is not active
1.4. Operation
1.5.1.Switching on
ATTENTION: Before switching on, check whether the operating voltage
corresponds to the voltage specified on the type plate!

Connect the heating plate to the 3-pin socket on the rear side and a
230V socket using the enclosed mains cable.

After the heating plate has been switched on via the mains switch, it
starts to heat up to the previously set value.

Use the + and - keys to set the desired SET temperature.

After a few minutes, the temperature reaches the set value and
stabilizes.

The heating plate should be switched off during breaks in work. The
temperature slowly drops to room temperature.
Symbol
---
M3
5
USER MANUAL
Explanation
countdown
no ext. temp.
sensor connected.
sound off
set temperature
heating is
switched off
external device
controls hot plate