Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
Do not move or remove the mesh trim panel when the appliance is plugged in and operating.
This will cause the remote control and touch panel to no longer function.
Connection by WIFI
•
Use your phone to scan the QR code below or search "Tuya Smart" in Application on
market to download and install the App.
•
Select your country code, enter the cellphone number and tap "Get" to get a
message containing verification on code.
•
Enter the verification on code in the message and tap"Login" to login the App.
•
Switch on the product and make sure the product is in WIFI covered environment. The
WIFI indicator light will rapidly blinks. If the indicator light do no rapidly blinks, please
press "
"button for 5 seconds ,then go to the App, tap "add device" at the
bottom, as shown in the picture 1.
➢ Choose "Heater",as shown in pic 2.
➢ Press the "confirm indicator rapidly blinks" when the indicating light on device
rapidly blinks,as shown in pic 3.
➢ Input password of WIFI and then confirm,as shown in pic 4
➢ Wait for the APP to connect with the device until it is connected succesfully .as
shown in pic 5.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
22
Ember Bed Brightness
Flame Speed
WIFI Reset
www.eshopping.de
Controls Ember Bed
brightness.
5 Settings:(-5,-4,-3,-2,-1)
Flame dims from -5 to -1.
-5 is the brightest setting(In
carbon bed mode C0, the
light brightness is the
brightest by default.)
Controls Flame Speed.
4 Settings:(1-2-3-4) Flame
Speed
Press and hold for 3 seconds
to reset WIFI
Publicidad
