EN
32
DOOR REVERSAL INSTRUCTIONS
1.
Make sure that your
refrigerator is unplugged.
2.
Remove the hinge cover and upper hinge from the top right side of the
cabinet. Remove the screw hole cover from the top left side of the cabinet.
3.
Remove the freezer compartment door from the cabinet.
4.
Remove the screws that secure
the lower hinge to the right side
of the cabinet, then remove the
hinge. Remove the adjustable
foot on the left.
5.
Remove the adjustable foot on the
lower hinge shaft, and remove the
washer and nut.
6.
Turn the lower hinge by 180 degrees.
7.
Install the washer and nut into
the hole on the pin shaft, and
then install the adjustable foot.