KRHÜNER 39211 Manual De Instrucciones página 7

1. Insert the product charging line into the shaver (Fig 3).
2. Plug in the charging line.
3. The red indicator lights up (Fig 4).
4. After the full charge unplug the charging line and also pull off the
product's plug from the shaver.
3. SHAVING
1. Press the button ON/OFF to start the shaver. The green light.
2. Make the shaver head part move quickly on the skin in straight
lines and circles (Fig 5).
3. Cover the shaver's protective cover after using, to avoid being
damaged (Fig 6).
4. The shaver can run for ten days after a full charge.
4. CLEANING & MAINTENANCE
• To ensure a better shaving effect, the shaver must be cleaned
regularly.
• The easiest and most sanitary way to clean the product is to wash
the shaver head part and the whisker storeroom with water each
time after using it.
• Do be careful while using hot water.
• Do remember to check the water is not too hot to avoid harming
hands.
• Every day: the shaver head part and the hair storeroom.
1. Cut off the power supply of the shaver, then unplug the charging
line and also pull out the product's plug from the shaver.
2. The product knife head from the body, and then press the release
button, open the head parts.
3. Clean the shaver head part and the hair storeroom with hot run-
ning water(Fig 8).
• Make sure both of the shaver head part and the hair storeroom be
cleaned thoroughly.
4. Close the shaver head part and throw off surplus water.
• Do not wipe the shaver head part with a towel or paper tissues,
which may cause damages to the shaver head.
5. Open the shaver head part again and remain so to dry up the
product (Fig 10).