Descargar Imprimir esta página

KRHÜNER 39211 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

• You can also use the brush included to clean the hair storeroom.
• Here water should not be used.
• Trimmer (Fig 11).
• Nose hair trimmer (Fig 12).
5. CHANGE
1. Change the shaver head once a year to get the best shaving
effect. The shaver has a long service life if not damaged for human
factors.
• The damaged or abraded shaver head can only be replaced with
products SPEED-XL shaver head.
1. Pull out the old shaver head assembly out of the shaver (Fig13).
2. Insert the flange of the new shaver the shaver's top and then press
down the shaver head assembly (2) to mount it on the shaver (a
click will be heard) (Fig14).
6. ACCESSORIES
• The following accessories are included with the product: charging
line Brush.
7. ENVIRONMENTAL PROTECTION
1. To discard the product, please don't put it together with general
domestic rubbish heaps but hand it to the officially designated re-
cycle canter for the environmental protection (Fig 15).
2. The built-in rechargeable battery contains substances which may
pollute the environment, so it must be unloaded from the product
or send to the officially designated recycle center to be disposed
before it is discarded.
• The battery should not be unloaded unless it has been used up.
1. Unplug the charging line and also pull out the product's plug from
the shaver.
2. Get the shaver to keep running until it stops; then screw off the
bolt and open the shaver (Fig 16).
3. Unload the battery.
• Do not plug in the shaver again after unloading the battery.

Publicidad

loading