Publicidad
Idiomas disponibles
Idiomas disponibles
Operation of control panel
6. Clock setting
Clock button make it available for you to input current or preset time when ":" flashes onto LED
display after plugged in, or try to skip it over to continue if unnecessary.
Example: to set 12:30
1
After power-up, the colon flashes
2
Press and hold Defrost/Clock button for 3 seconds
3
Turn Time/Weight knob to set exact hours.
4
Press Defrost/Clock button once again.
5
Turn Time/Weight knob to set exact minutes.
Press Defrost/Clock button once again or wait for 60
6
seconds, and the numbers will go steadily.
1. Before cooking
The LED flashes 3 times when plugged in power supply. Then
it flashes "1:00", prompting you to input the cooking menu
and time.
2. Time/Weight knob
You can increase or decrease cooking time, weight during
operation by turning the knob.
3. Pause/Cancel
At the initial or input stage: press once to cancel input
programs and resume initial stage.
During cooking: press once to stop oven operation, press
twice to cancel cooking programs.
4. Auto reminder
When your preset cooking procedure have finished, the LED
Display will show End and three beeps sound will be heard
to prompt you to take out food. If you do not press Pause/
Cancel button once or open the door, the beep will be
sounded at an interval of 3 minutes.
5. Instant cooking
On the standby status, press Instant/Start button, the oven
will start cooking with high power; system default cooking
time is 1 minute. You can increase or decrease cooking time
by turning the knob.
Steps
EN
ES PT CA
Display
1:00
1:00
12:00
12:00
12:30
9
Publicidad
