Publicidad
Idiomas disponibles
Idiomas disponibles
5.
This guarantee does not cover any of the following:
Periodic maintenance, and repair or replacement of parts due to normal wear and tear.
•
•
Damage caused by accident, misuse or neglect, or the fitting of other than genuine Truvox parts.
•
Defects in other than genuine Truvox parts, or repairs, modifications or adjustments performed by other than Truvox
service engineer or authorised service agent.
•
Costs and risks of transport relating directly or indirectly to the guarantee of this product.
Consumable items such as, brushes, drive discs, filters and vacuum skirts.
•
This guarantee does not affect your statutory rights, or your rights against the supplier arising from their sales or purchase
contract. Truvox International Limited policy is one of continual product development and we reserve the right to alter
specifications without prior notice.
RECOMMENDED SPARES & ACCESSORIES
Description
Standard brush – black (pack of 2)
Soft brush – grey (pack of 2)
Hard brush – blue (pack of 2)
Escalator brush – blue (pack of 2)
Side brush – standard
Side brush – soft
Side brush – hard
7 litre tank
Trolley
FAULT DIAGNOSIS
The following simple checks may be performed by the operator. If the machine is still not working, please contact your local
Service Agent:
Trouble
Machine fails to start – no power
Machine fails to pick up water
from the floor
Drum not rotating
Drum is rotating, but brushes are
not
Machine fails to spray solution
onto the floor
Motor makes a humming noise
but does not turn
The machine is vibrating
*If the fuse blows several times, the machine should be checked by an authorised Service Agent
PLEASE REFER TO THE BACK OF THE MANUAL FOR PICTORIAL INSTRUCTIONS
6
Reason
Transport working lever is in bottom
•
position (see pictorial guide)
Motor overload protector has tripped
•
•
Transport wheels not raising off the
ground when handle lowered
•
Lack of voltage / electrical supply
•
Incorrectly fitted / damaged
recovery tank Blocked hose or wand
•
Worn brushes
Drum not rotating
•
•
Debris around drum or base of
machine
Debris around brushes
•
Faulty pump
•
•
Improper water hose connection
No solution in solution tank
•
•
Blocked jet
Blocked inline filter
•
•
Blocked filter or faulty valve in
solution tank
Debris around drum and base of the
•
machine
Bristles on the brushes are deformed
•
MWPRO240
MWPRO340
90-0727-0000
90-0728-0000
90-0730-0000
90-0731-0000
90-0733-0000
90-0734-0000
90-0736-0000
90-0737-0000
90-0722-0000
90-0723-0000
90-0842-0000
90-0845-0000
90-0843-0000
90-0846-0000
90-0826-0000
90-0826-0000
05-4781-0000
05-4781-0000
Remedy
Change to operating position (see pictorial
•
guide)
Wait for 1 hour to allow the motor
•
temperature to reach room temperature.
Then try again
•
Check for debris and clean machine
•
Check fuse *, power cord, plug and socket
outlet
•
Refit or replace recovery tank
Check brush pressure, if needed replace
•
brushes
See below
•
•
Clean drum and base of the machine.
Clean or replace brushes
•
If there is no noise present from the pump,
•
check that the pump cable is fitted
correctly.
•
Check the quick lock connector for proper
fitting
•
Fill solution tank
•
Clean jet
Clean inline filter
•
•
Clean / replace filter or valve
Clean drum and base of machine
•
Soak brushes in a bucket of water
•
•
Replace both brushes
MWPRO440
90-0729-0000
90-0732-0000
90-0735-0000
90-0738-0000
90-0724-0000
90-0848-0000
90-0849-0000
90-0826-0000
05-4781-0000
(04-23)
Publicidad
