Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Step 1
Open the lid and take out the ice collecting tray and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not
exceed the MAX position. If the water exceeds the maximum scale MAX, you
need to open the bottom drain plug, release the excess water, and cover with
a transparent cover.Step 2
Plug in power, press the START/PAUSE button to start the machine.
1. The three cycles used for the first time, the ice produced is small and
irregular.
2. When the ice collecting tray is full, please take out the ice immediately, do
not let the ice overflow the ice collecting tray.
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water tank and
ice shovel frequently. When cleaning, unplug the unit and
remove the ice cubes. Use a diluted solution of water and
vinegar to clean the inside and the outside surface of the
Ice maker. Rinse thoroughly before use.
2. Keep ventilation openings in the appliance enclosure, or
in the built-in structure, clear of obstruction. Do not use
mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the
manufacturer.
3. Reuse the machine after being idled for a period of time,
it may not be able to pump enough water up for air
blockage. In this case, the water shortage indictor sign is
displayed, just repress START/PAUSE button to restart the
Publicidad
