TREVIDEA G3FERRARI G10165 Manual Del Usuario página 11

- Use the kettle only to heat or boil water.
- Fill the kettle with cold water, being careful to stay
within the limits indicated on the capacity of the storage
tank (maximum 0.8 L, 0.2 L minimum).
- Always pour the water before turning on the kettle.
Never pour liquids after switching on.
- If the kettle operates when it's empty, the safety device
shuts down automatically to prevent any damage. It
won't be possible to operate until the complete cooling
of the resistance.
- After having boiled the water, remove the plug and drain
completely to avoid the scaling of the electric resistance.
Once finished, unplug the unit and wait for the complete
cooling of each part before storing or cleaning.
- Do not immerse the appliance in water or other liquids.
In any case, avoid splashing of water or other liquids.
Put the kettle on stable shelves and floors.
DESCRIPTION G10165
1 Nozzle
4 Handle
7 Power on button
MOUNTING
This kettle is equipped with a silicone container (5) that can be folded to reduce the dimension and store it well.
To open the kettle and use it, take the upper hard plastic with an hand, the base (6) with the other hand, and pull
opening completely. To fold the kettle after use press the upper part agaist the base, collapsing the container.
To open the handle (4), take it out of the lid and rotate until you ear a click. To close the handle press the lock
button (3). To open the lid (2) press the lock buttons on it and pull out the lid.
DUAL VOLTAGE
Power supply can be 110V or 220V. If you need to change the power supply, please move the voltage
selector (7) with a coin or with a screwdriver to the desired power supply.
WARNING: before use make sure that the voltage selector is set on the proper voltage.
MAIN FUNCTIONS
Before using, operate the kettle 2 or 3 times and boil the maximum amount of water (800cc) by replacing
each time hot water with cold water.
OPERATING THE KETTLE
- Pour in the kettle the desired amount of water, never exceeding the limits indicated (MAX: 0.8 L, MIN: 0.2
L). Close the lid until it locks in position and connect the plug to the power socket.
- Operate the kettle by pressing the power ON button (7).
- When the liquid is boiling, the thermostat automatically turns off the unit.
2 Lid with lock buttons
5 Silicone Container
8 Voltage selector
3 Handle lock button
6 Kettle body
9 Max indication 10 Min indication
10