Ryobi CRS-1801 Manual De Utilización página 13

• When heavily-loaded or used at extreme temperatures, the electrolyte may leak from the battery. If the electrolyte comes
into contact with your skin, wash immediately with soap and water and neutralise with lemon juice or vinegar. If the
liquid gets in your eyes, rinse them with clean water for at least 10 minutes and consult a doctor or the emergency
services immediately.
• When carrying your battery-operated saw, make sure it is not running and your finger is not on the switch. Avoid starting
the saw accidentally.
• SECURE YOUR WORKPIECE PROPERLY before starting your saw. NEVER hold the workpiece in your hand or
between your legs.
• FOR MAINTENANCE PURPOSES, USE ONLY THE MANUFACTURER'S ORIGINAL REPLACEMENT PARTS.
IMPORTANT SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS
• KEEP BLADES CLEAN AND SHARP. Sharp blades reduce the risk of stalling and kickback.
• KEEP HANDS AWAY FROM THE CUTTING AREA and the blade. Do not reach underneath the workpiece while the
blade is moving. Do not attempt to remove offcuts while the blade is moving.
• NEVER touch the blade or other moving parts during use.
• NEVER put the saw down before the moving parts have come to a complete stop.
• USE THE RIGHT TOOL. Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes for
which they are not designed.
• AVOID STARTING THE SAW ACCIDENTALLY: Do not carry a battery-operated saw with your finger on the trigger.
Ensure that the saw is turned off before fitting-in the battery.
• KEEP THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this saw. If you
lend this saw to someone, give them these instructions as well.
KEEP THESE INSTRUCTIONS
3. SPECIFICATIONS
Blade stroke
Motor
No Load Speed
Trigger
4. UNPACKING
Your reciprocating saw has been shipped fully assembled except for the blade. Inspect it carefully to make sure that it has
not been broken or damaged during shipping. If any parts are damaged or missing, contact your nearest Ryobi Authorised
Service Centre to obtain replacement parts before attempting to operate the saw. Two blades and this user manual are also
included
WARNING:
If any parts are missing, do not operate this saw until the missing parts have been replaced. Failure to do so could
result in serious personal injury.
5. FEATURES
5.1 KNOW YOUR RECIPROCATING SAW
See Figure 1.
Before attempting to use your saw, familiarise yourself with its operation and all safety instructions.
WARNING:
Please read the user manual thoroughly and ensure that you understand it before using your reciprocating saw.
Pay close attention to the safety instructions, warnings and cautions. To enjoy years of safe, reliable service,
use your reciprocating saw correctly and only for the purpose for which it is designed.
WARNING:
If any parts are missing, do not operate this saw until the missing parts have been replaced. Failure to do so could
result in serious personal injury.
WARNING:
Do not allow familiarity with your saw to make you over-confident. Remember that a moment of inattention is
sufficient to inflict severe injury.
30 mm
18 Volt DC
-1
0-2500 min
Variable Speed
13
GB