BETEX HPP Serie Manual De Instrucciones página 9

5. Cleaning and maintenance
5.1 Nature and frequency
• We recommend that the puller is cleaned using a cloth and a mild degreasing agent after
every use.
• Only for competent users (as described in Section 1).
• Release the pressure from the entire system.
• Retract the cylinders fully before refreshing the oil. This prevents overfilling. An overfill can
cause personal injury due to excess reservoir pressure created when cylinder is retracted.
6. Disposal
6.1 In accordance with statutory regulations
All materials must be disposed of in accordance with statutory requirements.
• Check that the press cylinder is retracted.
• Release the pressure from the system.
• Remove the oil.
• Or return the materials to the supplier.
7. Disclaimer
The manufacturer and/or supplier cannot be held liable for any damage or consequential
damage resulting from incorrect use of the device or damage to workpieces and any
consequential damage resulting from a defect in the device.
© BETEX Tools
EN
DE
ES
FR
NL
9