Descargar Imprimir esta página
Southwire TOPAZ OS-PIR-12V Instrucciones De Programacion
Southwire TOPAZ OS-PIR-12V Instrucciones De Programacion

Southwire TOPAZ OS-PIR-12V Instrucciones De Programacion

Sensor de movimiento pir

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Item:
OS-PIR-12V
OS-PIR-BT-12V
PROGRAMMING INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
Make all electrical and ground connections in accordance with local codes or the National
Electrical Code. If you are not familiar with these codes and requirements, consult a
qualified electrician. This Professional should be familiar with the construction and
operation of this product and hazards involved. Failure to do so may result in serious
personal injury.
To reduce the risk of fire, electric shock, personal injury, or property damage, please read
and follow all safety instructions. If you do not understand these instructions or if any
additional information is required, contact your local Topaz representative. Retain these
instructions for maintenance reference.
Do not exceed the allowed supply voltage marked on the luminaire label information.
Disconnect power at the circuit breaker panel before any installation.
Do not expose wire to any sharp objects such as sheet metal to prevent wiring damage or
abrasion.
While the light is on, please avoid direct eye exposure.
Combustible material should be kept away from fixture/LENS.
Do not make or alter any open holes in any enclosure or any electrical component during
installation.
Do not use when the enclosure is damaged or broken in any way.
Do not alter, relocate or remove wiring, lamp holder power supply or any other electrical
component.
Pursuant to NEC 410.69, "Effective January 1, 2022, where control conductors are spliced,
terminated, or connected in the same luminaire or enclosure as the branch-circuit
conductors, the field-connected control conductor shall not be of a color reserved for the
grounded branch circuit conductor or the equipment grounding conductor." And NEC
200.6(A)(2), "An insulated grounded conductor of 6 AWG or smaller shall be identified by
one of the following means: (2) The insulated conductor shall have a continuous gray outer
finish." For this reason, Topaz® will be transitioning from using Purple and Gray dimming
wires, to Purple and Pink dimming wires.
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
PIR MOTION SENSOR
WARNING
CAUTION

Publicidad

loading

Resumen de contenidos para Southwire TOPAZ OS-PIR-12V

  • Página 1 (2) The insulated conductor shall have a continuous gray outer finish.” For this reason, Topaz® will be transitioning from using Purple and Gray dimming wires, to Purple and Pink dimming wires. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 2 6. Press MODE1 and once again aim the remote at the sensor. Press SEND. The light will flash off and on to confirm. Note: Up to 4 modes can be stored in the remote. Follow the steps above 3 more times selecting a different mode each time. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 3 9. Once the sensor is added, press “Done”. See Figure 7. 10. To access the sensor press “Area”. See Figure 8. 11. Select the newly installed sensor. See Figure 9. Figure 7 Figure 9 Figure 8 www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 4 **REMARQUE : CES INSTRUCTIONS NE TRAITENT PAS DE TOUTES LES PERMUTATIONS QUI PEUVENT EXISTER DANS L’INSTALLATION, LA MAINTENANCE ET L’ENVIRONNEMENT D’EXPLOITATION. **NOTA: ESTAS INSTRUCCIONES NO ABORDAN TODAS LAS PERMUTACIONES QUE PUEDEN EXISTIR EN EL ENTORNO DE INSTALACIÓN, MANTENIMIENTO Y OPERACIÓN. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 5 être identifié par l’un des moyens suivants: (2) Le conducteur isolé doit avoir une finition extérieure grise continue. » Pour cette raison, Topaz® passera de l’utilisation de fils de gradation violets et gris aux fils de gradation violets et roses. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 6 **REMARQUE : CES INSTRUCTIONS NE TRAITENT PAS DE TOUTES LES PERMUTATIONS QUI PEUVENT EXISTER DANS L’INSTALLATION, LA MAINTENANCE ET L’ENVIRONNEMENT D’EXPLOITATION. **NOTA: ESTAS INSTRUCCIONES NO ABORDAN TODAS LAS PERMUTACIONES QUE PUEDEN EXISTIR EN EL ENTORNO DE INSTALACIÓN, MANTENIMIENTO Y OPERACIÓN. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 7 10. Pour accéder au capteur, appuyez sur « Area » (Zone). Reportez- vous à la Figure 8. 11. Sélectionnez le capteur nouvellement installé. Reportez-vous à la Figure 9. Figure 7 Figure 9 Figure 8 www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 8 **REMARQUE : CES INSTRUCTIONS NE TRAITENT PAS DE TOUTES LES PERMUTATIONS QUI PEUVENT EXISTER DANS L’INSTALLATION, LA MAINTENANCE ET L’ENVIRONNEMENT D’EXPLOITATION. **NOTA: ESTAS INSTRUCCIONES NO ABORDAN TODAS LAS PERMUTACIONES QUE PUEDEN EXISTIR EN EL ENTORNO DE INSTALACIÓN, MANTENIMIENTO Y OPERACIÓN. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 9 6 AWG o menor se identificará por uno de los siguientes medios: (2) El conductor aislado tendrá un acabado exterior gris continuo". Por esta razón, Topaz® pasará de usar cables de atenuación púrpura y gris a cables de atenuación púrpura y rosa. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 10 **REMARQUE : CES INSTRUCTIONS NE TRAITENT PAS DE TOUTES LES PERMUTATIONS QUI PEUVENT EXISTER DANS L’INSTALLATION, LA MAINTENANCE ET L’ENVIRONNEMENT D’EXPLOITATION. **NOTA: ESTAS INSTRUCCIONES NO ABORDAN TODAS LAS PERMUTACIONES QUE PUEDEN EXISTIR EN EL ENTORNO DE INSTALACIÓN, MANTENIMIENTO Y OPERACIÓN. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 11 9. Una vez añadido el sensor, presiona “Done” (Listo). Ver la Figura 7. 10. Para acceder al sensor, presiona “Area”. Ver la Figura 8. 11. Seleccione el sensor recién instalado. Ver la Figura 9. Figura 7 Figura 9 Figura 8 www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
  • Página 12 **REMARQUE : CES INSTRUCTIONS NE TRAITENT PAS DE TOUTES LES PERMUTATIONS QUI PEUVENT EXISTER DANS L’INSTALLATION, LA MAINTENANCE ET L’ENVIRONNEMENT D’EXPLOITATION. **NOTA: ESTAS INSTRUCCIONES NO ABORDAN TODAS LAS PERMUTACIONES QUE PUEDEN EXISTIR EN EL ENTORNO DE INSTALACIÓN, MANTENIMIENTO Y OPERACIÓN. www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.

Este manual también es adecuado para:

Topaz os-pir-bt-12v