Southwire TOPAZ OS-PIR-12V Instrucciones De Programacion página 3

Item:
OS-PIR-12V OS-PIR-BT-12V
PROGRAMMING INSTRUCTIONS
Parameter Setting By Bluetooth Control (OS-PIR-BT-12V):
Figure 1 Figure 2
Figure 5
Figure 4
Figure 7
Figure 8
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
PIR MOTION SENSOR
1. To begin, you must install the Sharkward App on your phone or
2. Register the app and create a project profile.
3. Make sure the fixture/sensor is powered on. Press the "Area"
4. Locate the sensor you wish to connect and press the Green "Add"
5. Press the Blue "+" to connect to the sensor to the project. See
Figure 3
6. Once the sensor is connected, press Done. See Figure 4.
7. Select the sensor again and press Next to add the sensor to the
8. If your Project has multiple buildings or floors, you will be
Figure 6
9. Once the sensor is added, press "Done". See Figure 7.
10. To access the sensor press "Area". See Figure 8.
11. Select the newly installed sensor. See Figure 9.
Figure 9
tablet. Scan the QR code or download from the Google Play Store
or Itunes.
button underneath "Area Management" to add sensors. See
Figure 1.
button to select. See Figure 2.
Figure 3.
Project. See Figure 5.
prompted to select the "Area" the sensor is installed in and press
"Save". See Figure 6.