Panasonic ER-GC20 Instrucciones De Funcionamiento página 4

Parts identification
(Back)
Main body
Sliding plate for
maintenance
Power switch [0/1]
Water drain hole
Blade block
Cleaning lever
Moving blade
Stationary blade
Mounting hook
(For United
Kingdom)
Comb attachment
(/6/9/12/15/18/21 mm)
Trimming height adjustment
button
AC adaptor (RE7‑59)
Power cord
Appliance plug
Oil
Cleaning brush
Using
Using the clipper with the comb attachment
• We recommend using the clipper in an ambient temperature
range of 0 ‑ 5 °C. If used outside this range, the appliance may
stop operating.
1. Slide the power switch on the main
body to the "0" position to turn off the
clipper.
2. Make sure there is no damage to the
blade.
3. Insert the appliance plug into the
clipper.
4. Plug in the AC adaptor into a
household outlet.
5. Mount and adjust the comb
attachment to the required setting.
Adjusting the comb attachment
While pressing on the trimming height
adjustment button, slide and adjust the
comb attachment so the mark ( ) aligns
with the desired trimming height.
• Actual hair length will be a little longer
than the height you set.
6. Slide the power switch on the main body to
the "1" position to turn on the clipper.
Note
Power will not turn on while the sliding plate for maintenance
is open.
4
1
3
Example: For  mm