5. Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water.
If liquid gets in contact with eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6. Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
1.3 Special Safety instructions
Never hold your fingers or other body parts in the working area of the cylinder. Remove the battery before carrying out any work on the machine.
If the device is so badly damaged that electric cables or drive parts are exposed, disconnect the main plugs immediately and contact your customer
service. Unauthorised repair work may result in the user suffering major injuries or even death.
Only personnel trained in how to use the device may make crimp pipe joints using the Coupling tool BE90 18V 18 V.
The machine may only be used with an expander head inserted into it. The expander head must be in perfect technical conditions.
Only start the machine if it is in perfect working order.
Servicing and repair work may only be carried out by workshops authorised by Valsir.
Use only suitable expander heads that have been approved by Valsir.
In the event of problems during the expanding process, press the emergency stop button. Follow the installation instructions supplied by Valsir. After
finishing the work, check the installation with appropriate testing equipment and assure that there are no leaks!
Battery / Charger:
RISK OF EXPLOSION!
Physical injury!
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This tool is only suitable for indoor use. Never expose tool to rain!
No metal parts must be allowed to enter the battery section of the charger (short circuit risk).
RISK OF FIRE!
Short-circuit! Do not bridge contacts of the battery charger with metal parts!
Do not charge battery in direct sunlight. Only use the battery in an ambient temperature between -10°C and 60°C.
RISK OF FIRE!
Never charge batteries near acids and highly flammable materials.
Battery fluid may leak from damaged removable batteries under conditions of extreme load or extreme temperatures. Any areas that have come into
contact with battery fluid should be washed immediately with soap and water. If battery fluid comes into contact with the eyes rinse them thoroughly
for at least 10 minutes and consult a doctor immediately.
Do not store batteries with metal objects (danger of short circuit).
Check before each use: Carry out a visual inspection each time before using the battery charger. Never charge a damaged battery pack. Replace
by a new one. The mains power cable / charging cable must be inspected regularly for signs of damage and ageing (brittleness) and may only be used
in perfect conditions. Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times.
End of charging / storage: So that the fully charged battery is not discharged, the battery should be disconnected from the battery charger.
Store the battery charger with disconnected mains plug. Storage temperature 0° - 30°C.
2. Technical data
Battery voltage
Battery capacity
Rated power consumption
Motor speed
Maximum piston force
Expanding time (according to nominal size)
Dimensions (LxWxH)
16
18V
1,5 Ah
540 W
22000 1/min
30 kN
ca. 5 s
443 x 105 x 79 mm