Publicidad
Idiomas disponibles
Idiomas disponibles
3.8 TWS coupling
1.
Press and hold the power button on both AU3260 products for 2-3 seconds until the
indicator lights on both products blink rapidly blue.
2. Select one product as the lead speaker and briefly press the power button twice to start
pairing.
3. After the pairing is successful, the blue indicator light on the lead speaker will flash slowly
and the indicator light on the secondary speaker will remain solid blue.
4. Turn on the Bluetooth on your mobile device, search 'Auronic Boombox' and connect.
The blue indicator light of the lead speaker will stay on continuously. The two products will
play music simultaneously when the pairing is complete.
Note
To disconnect the TWS link, press the "+" and "-" volume buttons simultaneously. You will see
◊
the blue indaction light flash rapidly on the secondary speaker. This means that the pairing
has been successfully disconnected.
3.9 Control buttons
No.
Function
1
Indicator light
2
Microphone
3
Sound effect
4
Volume up/Next track
28
Instruction
Indicates the state of the paired device/device.
Use the microphone while calling.
See 3.7 Adjusting sound effect.
Press briefly to adjust volume.
Press and hold to go to next track.
Publicidad
