Buffalo FU476 Manual De Instrucciones página 2

EN
Safety Instructions
Intended for commercial and indoor use only!
DO NOT process items that this machine is not designed for to avoid any property damage
or personal injury.
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT immerse the motor base in water.
• DO NOT bypass any safety interlocks on the appliance.
• DO NOT attempt to cut frozen food with the appliance.
• Always switch off and disconnect the power supply to the
appliance before putting on or taking off parts, when not in
use, before cleaning and maintenance and storage.
• Be extremely careful when handling blades, especially when
assembling/disassembling and cleaning. Blades are very
sharp.
• Only use original BUFFALO parts and attachments with this
appliance, or your guarantee will be invalidated.
• Leave at least 15mm clearance around the appliance for
ventilation during use.
• ALWAYS keep hands, hair and clothing away from the moving
parts.
• NEVER leave the appliance unattended when in use.
2
FU476_ML_A5_v2_20240327.indb 2 FU476_ML_A5_v2_20240327.indb 2 2024/3/27 11:23 2024/3/27 11:23