Publicidad
Idiomas disponibles
Idiomas disponibles
Removing lodged food
1. Should any food debris get lodged under the blades, turn off and unplug the unit.
2. Remove the transparent cover and grinding bowl by turning clockwise.
3. Use a spatula to carefully remove the food lodged under the blades. Blades are sharp - Never
attempt to use fingers to remove any lodged object.
4. Re-assemble and re-start the appliance.
Grinding Tips
Never use the grinder to chop ice cubes.
Spices, freshly ground peppercorns etc. may have a strong aroma and a taste that may affect the flavour
of coffee beans ground afterward. Thus, it is recommend to use the extra grinding bowl supplied to grind
coffee beans.
Cleaning, Care & Maintenance
•
Warning: Always turn off and disconnect the appliance from power supply before
cleaning and maintenance.
•
Allow to cool before cleaning.
•
Let the motor come to a complete stop before disassembly and cleaning.
•
Remove all food debris.
•
Never immerse the motor base in water, nor rinse it under running water. Clean the surface using a
damp cloth.
•
Use warm, soapy water and a damp cloth to clean all removable parts.
Extreme care should be exercised as the blades are sharp.
•
Periodically remove the rubber seal from the transparent cover (with a blunt-ended tool) for thorough
cleaning.
•
Dry all parts well and re-assemble.
•
Periodically lubricate the shaft with some vegetable oil.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Cover not located correctly
Appliance stops
Cover is unlocked during use thus the
working suddenly
microswitch functions
Overheating protection is activated
due to intensive use
FU476_ML_A5_v2_20240327.indb 5
FU476_ML_A5_v2_20240327.indb 5
Probable Cause
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the plug fuse
Check mains power supply
Locate the cover correctly
Do not remove the cover during use
Turn off and unplug. Allow to cool for at
least 10 minutes and try again
EN
5
2024/3/27 11:23
2024/3/27 11:23
Publicidad
