Buffalo 600 Serie Manual De Instrucciones página 5

Cleaning, Care & Maintenance
• The appliance should be cleaned after each day's operation; however it may require
cleaning more often, depending on the volume of use carried out.
• Do not use any abrasive cleaning agents on the appliance.
1. Switch off and disconnect the appliance from the power supply.
2. Allow the appliance to cool down before cleaning.
3. The ceramic heater cannot be immersed in water, but can be wiped down with a damp cloth.
4. Use a suitable detergent to clean the container. Let it dry well, ensuring no moisture enters the inside
of the appliance.
5. The main body can also be cleaned with warm soapy water.
6. After cleaning as above, please use a dry cloth to clean the appliance to ensure there is no water on
the control panel.
Clean removable parts
• Use warm, soapy water and a soft brush to clean the chip scuttle container.
• Dry thoroughly.
Troubleshooting
A qualified technician should carry out repairs if required.
Fault
The unit is not The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Appliance heats up Indicator light has expired
but indicator light
does not come on
On/off indicator Faulty on/off switch
light comes on but
Faulty heating element
appliance does not
heat up
Appliance High voltage, improper use
overheats
CU479_ML_A5_v2_20231207.indb 5
Probable Cause Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the fuse
Check mains power supply
Consult a qualified technician
Consult a qualified technician
Consult a qualified technician
Switch Off immediately. Consult a qualified
technician
EN
5
2023/12/7 18:28:31