Klarfit Goldie Jogger Manual Del Usuario página 19

EN
2. Parking Brake assembly
Open the zipper under the side wall inside, put the screw into the mount hole, put the nut on
the screw inside, use the open end wrench (8mm) or socket wrench (8mm) and screwdriver
to mount the parking brake on both sides as per following images and steps, make sure the
parking brake mounted tightly.
3. Wheels assembly
Press the axle center button and insert the axle into the frame tube simultaneously, make sure
the wheel mounted safety.
Remark: press the button and do the opposite step to remove the wheel.
19